Gå direkt till innehåll
Photo: CLAAS
Photo: CLAAS

Pressmeddelande -

​CLAAS TERRA TRAC – it's all about the soil

Drawing on its many years of experience gained in the field and through meeting the needs of 25,000 satisfied customers, CLAAS is showing its TERRA TRAC expertise at Agritechnica with enhanced versions of its crawler track system fitted to a JAGUAR forage harvester and an AXION large tractor.

It's all about the soil – and has been for 30 years

Soil compaction reduces yields and takes a great deal of work to eliminate again. This is why CLAAS attaches great importance to soil protection, starting with measures taken during the machine development process. It was 30 years ago that the company presented the first series-production combine harvester with full rubber tracks. This was followed by the TERRA TRAC concept a few years later. Since then, CLAAS has pursued the systematic development of crawler track technology on the LEXION large combine harvester. The benefits of this system for combine harvesters comprise:

- 66% lower soil pressure compared with wheeled machines

- 40 km/h on-road travel with a transport width that complies with road traffic licensing regulations

- high level of driving comfort through hydropneumatic suspension

- smooth front attachment guidance and excellent directional stability

- high stability on side slopes

- potential for cost savings through protection of soil structure and reduced effort required for subsequent tillage

As the next logical step, CLAAS is now equipping AXION large tractors and JAGUAR forage harvesters with this concept which has been optimised specifically to meet customers' requirements.

TERRA TRAC on JAGUAR
In equipping its JAGUAR with TERRA TRAC, CLAAS is the first forage harvester manufacturer to present a factory-fitted integrated crawler track system for forage harvesters which protects the soil and grass cover with a unique, integrated headland protection feature. During a turning manoeuvre, the machine is supported on the middle support rollers, thereby raising part of each crawler track. As a result, the contact area and degree of soil pressure change briefly to a level comparable to that obtained with 800-size tyres. Studies by Kiel University of Applied Sciences have shown that, by shortening the contact area in this way, it is possible for the undesirable shear effect (which is otherwise encountered when turning a machine with crawler tracks on grass) to be reduced to almost the same level as that which results with a wheeled machine. This innovative concept allows year-round operation with a high degree of machine utilisation and no time lost in conversion. With 635 mm wide tracks, the JAGUAR with TERRA TRAC remains within a transport width of 3.0 m with a top speed of 40 km/h. With 800 mm wide tracks, the machine has an external width of less than 3.5 m. Another practical benefit is that removal and installation of the corncracker from the side is considerably easier as the crawler tracks are lower than tyres.

TERRA TRAC on AXION
The AXION 900 TERRA TRAC from CLAAS is the first half-track tractor with full suspension. The German Agricultural Society (DLG) recognised this concept with a silver medal on the occasion of Agritechnica. The crawler track system is based on the technology currently in use with combine harvesters. The drive wheel, which is larger than those found on the forage and combine harvester track units, allows the transmission of greater torque. Even during heavy tillage at low speed, the crawler track system transmits the drive power to the ground with minimal slippage. The prototype of the AXION 900 TERRA TRAC combines the advantages of a tracklaying tractor in terms of traction and soil protection with the driving comfort of a standard tractor. The independent suspension of the drive wheel, land wheel and support rollers allows the crawler track unit to adapt optimally to the ground. Despite its large contact area, the AXION 900 TERRA TRAC is significantly narrower than a tractor with wide or twin tyres. The suspension offers a very high level of driving comfort at up to 40 km/h. 

Ämnen


Swedish Agro Machinery
Swedish Agro Machinery är ett svensk företag fokuserat på representation och import av CLAAS lantbruksmaskiner i Sverige. Företaget är också generalagent för SAMSON, HORSCH och AVR och återförsäljare av LEMKEN. Swedish Agro Machinery är ett dotterbolag till Danish Agro-koncernen som består av en rad företag inom lantbruksbranschen i Danmark och andra länder.

Om CLAAS
CLAAS är ett familjeföretag grundat 1913 och är en av världens ledande tillverkare av lantbruksmaskiner. Företaget, med huvudkontor i Harsewinkel i Tyskland, är marknadsledande tillverkare av skördetröskor i Europa. CLAAS är världsledande i en annan stor produktgrupp; självgående fälthackar. CLAAS är också en av de främsta aktörerna på världsmarknaden för traktorer, lantbrukspressar och vallskördemaskiner. CLAAS produktportfölj innefattar också modernaste utrustning för lantbrukets informationsteknologi. CLAAS sysselsätter 11 300 medarbetare över hela världen.

Kontakter

Helena Wictorin

Presskontakt Marketing- & Kommunikationschef +46 73-094 74 09

Relaterat innehåll

Förser svenskt lantbruk med maskiner, insatsvaror och foder

Swedish Agro är ett svenskt företag som förser lantbrukare med insatsvaror, foder och maskiner av högsta kvalitet. Företaget representerar CLAAS, HORSCH, METSJÖ, RAUCH, SPEARHEAD, SCANSTONE, AVR, AGXEED och DALBO i Sverige. Service och reservdelar finns mobilt och på 24 orter både via egna anläggningar och servicepartners. Med en av Europas modernaste foderfabriker tillverkas foder för flera djurslag. Swedish Agro är ett företag i Danish Agro-koncernen som består av en rad företag inom lantbruksbranschen i norra Europa.

Swedish Agro